cutting machine saw bottoum out, saw bottom out pvc, pvc profile joinery machine, aluminum joinery machine, otomatic aluminum joinery machine, aluminum and pvc profile joinery machine         plc controlled profile joinery machine, aluminum cutting machine, aluminum and profile cutting machine with servo control, pimapen cutting machine, aluminum and pvc profile joinery machines         double headed cutting machine, doble headed aluminum cutting machine, double heade cutting machine, double headed pvc cutting machine, aluminum cutting machine, aluminum window joinery machine, pvc window joinery machine         pvc milling machine, pvc copy milling machine, Copy milling machine for PVC profiles with three drills, Copy milling machine triple drills, water evacuation, pvc triple drills, copy, milling, water, evacuation, machine         manuel end milling machine, pvc midle profile milling, pimapen end milling machine, pvc end milling machine         pvc welding machine, profile corner welding machine, pvc welding machine, pimapen welding machine, window corner welding machine, pvc, corner,welding, machine         pvc welding machine, profile corner welding machine, pvc welding machine, pimapen welding machine, window corner welding machine, pvc, corner,welding, machine, Single head welding machine         profile corner cleaning machine, pvc corner cleaning machine, profile corner cleaning machine, pimapen cleaning machine, pvc surface cleaning machine         pvc glazing bed saw, prifile glazing bed saw, glazing bed saw, glazing bed saw, window glazing bed saw, pvc glazing bed saw         pvc aluminum pressing machine, aluminum profile combining machine, aluminum press machine, aluminum corner press machine         reinforcement profile, cutting, machine, pvc reinforcement profile cutting machine, reinforcement profile cutting machine, reinforcement cutting machine

Full Otomatic Cutting Machine Saw Top Out With Digital Conveyor


Machine Code: H-105
Language support: Turkish, English, Russian, Farsi, Polonian
Leght: 1000 mm
Width: 700 mm
Height: 1850 mm
Weight:
Air Pressure: 6-8 Bar
Operating Voltage : 3 Phaze, 380 Volt, 50 Hz
AC Motor: 3 Phaze, 1.5 Hp
Servo Motor: 1Phaze, 400 W, 50 Hz
Total Power: 2000 W
PLC: Full Otomatic PLC Controlled
HMI: 16 Colour operator panel (Touch pad)
Reset: Resets itself automatically at each opening. Machine can be reset at any time.
PVC Profile Cuttingi: Can be done.
Aluminum Profile Cutting: Can be done.
Cooler system: Exist. For cutting aluminum there is saw oiling system 
Counting profile piece for cutting: Exist.
Conveyor System: Digital conveyor system is available. No need to measure profile leght.
Min Profile Cutting Measure: 0 mm
Max Profile Cutting Measure: No Limit.
Min Angle Cutting Value: - 45 Degrees
Min Profile Progress Value: 0,1 Degrees (0,1 degrees can turn step by step)
Capability of Cutting at any Angle: can cut at any angle between - 45 ve + 45. Example: 15,5 degrees, 22.5 degrees, 22,6 degrees, 22,7 degrees e.t.c...
Cutting Time Adjustment: Exist. İt Can be Ajusted by Operator..
Error Status Notification: Exist. İt can tell the problem and hot it can be solved.
Safety: Employee and Machine safety at Maximum Value.

  • -45 To 45 degree angle between the cutting profile desired value can be set. For example, -45, -44.9, -44.8, .....- 44.5, -22.5, -22, ..... -10, .... -1, -0.5 .... 0, 0.1, 0.2, ..... 10.5, 12.1, 12.2, ........ 44.5, 44.6, 44.7 ...... 45 degrees.
  • Angle movement occurs automatically through Servo Motor.
  • In terms of deviation value 0 (zero's), is no. The exact value of the desired angle can be captured.
  • It is very fast and can reach the greatest angle to a value of 2 sec.
  • After a long process to reset the machine does not need.
  • The first landing on the machine automatically resets itself.
  • Profile of the desired length can be adjusted through the digital conveyor. Profile length is displayed on the touch panel. Profile length deviation 0 (zero), is no.
  • Profile 0.1 millimeters in length can be progress. For example, 1000.0 mm, 1000.1. mm, 1000.2 mm, etc. ..
  • Conversion is available in terms of the ramps. The first development is slow and stop. Thus, the vibration of machines and mechanical life was extended for expenses.
  • Cause and solution to all of the machine error tells how to do.
  • he machine will not be disabled for possible errors. Studies by the slowdown continues. The error is resolved automatically by the former speed is reached. Thus, the user does not prevent the flow of business.
  • As a touch panel interface that includes 16 colors (HMI) is used. Visual and user-friendly software interface.
  • PLC is used as the control unit.
  •  It is very easy to use.
  • Machine interface, English, Russian, Persian and Polish language support.
  • Percent are between the Help menu.
  • Time to start cutting the Testerele between 1-10 seconds can be set.
  • Maintenance other than cleaning and lubrication is required.
  • It has advanced user guide.