cutting machine saw bottoum out, saw bottom out pvc, pvc profile joinery machine, aluminum joinery machine, otomatic aluminum joinery machine, aluminum and pvc profile joinery machine         plc controlled profile joinery machine, aluminum cutting machine, aluminum and profile cutting machine with servo control, pimapen cutting machine, aluminum and pvc profile joinery machines         double headed cutting machine, doble headed aluminum cutting machine, double heade cutting machine, double headed pvc cutting machine, aluminum cutting machine, aluminum window joinery machine, pvc window joinery machine         pvc milling machine, pvc copy milling machine, Copy milling machine for PVC profiles with three drills, Copy milling machine triple drills, water evacuation, pvc triple drills, copy, milling, water, evacuation, machine         manuel end milling machine, pvc midle profile milling, pimapen end milling machine, pvc end milling machine         pvc welding machine, profile corner welding machine, pvc welding machine, pimapen welding machine, window corner welding machine, pvc, corner,welding, machine         pvc welding machine, profile corner welding machine, pvc welding machine, pimapen welding machine, window corner welding machine, pvc, corner,welding, machine, Single head welding machine         profile corner cleaning machine, pvc corner cleaning machine, profile corner cleaning machine, pimapen cleaning machine, pvc surface cleaning machine         pvc glazing bed saw, prifile glazing bed saw, glazing bed saw, glazing bed saw, window glazing bed saw, pvc glazing bed saw         pvc aluminum pressing machine, aluminum profile combining machine, aluminum press machine, aluminum corner press machine         reinforcement profile, cutting, machine, pvc reinforcement profile cutting machine, reinforcement profile cutting machine, reinforcement cutting machine

Full Otomatic Double Headed Cutting Machine Saw Top Out


Machine Code: H-110
Language Support: Turkish, English, Russian, Farsi, Polonian
Length: 4300 mm
Width: 1000 mm
Height: 1850 mm
Weight:
Air Pressure : 6-8 Bar
Operating Voltage : 3 Phaze, 380 V, 50 Hz
AC Motor: 3 Phaze, 1.5 Hp
Servo Motor: 1 Phaze, 400 W, 50 Hz
Total Power: 4500 W
PLC: Full Otomatic PLC controlled
HMI: 65000 Colour operator panel (Touch pad)
Reset: Resets itself automatically at each opening. Machine can be reset at any time.
PVC Profile Cuttingi: Can be Done
Aluminum Profile Cutting:Can be Done.
Cooler System: Exist. For cutting aluminum there is saw oiling system 
Counting profile piece for cutting: Exist
Min Profile Cutting Measure:605 mm
Max Profile Cutting Measure:3250 mm
Min Angle Cutting Value:0 Degrees (0 degrees = 90 degrees)
Min Profile Progress Value:1 mm (1 mm can be moved step be step)
Max Angle Cutting Value: 45 Degrees
Min Angle Progress Value: 0.1 Degrees (0.1 degrees can turn step by step)
One Head Mode: Exist
Cutting Time Adjustment: Exist. İt Can be Ajusted by Operator.
Error Status Notification: Exist. İt can tell the problem and hot it can be solved
Safety: Employee and Machine safety at Maximum Value.

    • Single head and dual head mode can be executed.
    • Profile cutting angles 0 (90 degrees) and 45 degrees in the desired value can be set. For example, 0, 0.1, 0.2, ..... 10.5, 12.1, 12.2, ........ 44.5, 44.6, 44.7 ...... 45 degrees.
    • Angle movement occurs automatically through Servo Motor.
    • In terms of deviation value 0 (zero), is no. The exact value of the desired angle can be captured.
    • It is very fast and can reach the greatest angle to a value of 2 sec.
    • After a long process does not need to reset the machine.
    • The first landing on the machine automatically resets itself.
    • Profile is carried out through a length-servo motor. Only through the touch panel to enter the profile values is sufficient. Automatically advances to the desired length of the moving head and deviation 0 (zero), is no.
    • Will reach 4 meters in 6 seconds. Security in terms of speed is reduced.
    • Progress can be made in the length of 1 millimeter profile. For example, 1000 mm, 1001 mm, 1002 mm, etc. ..
    • And moving the head to turn in terms of ramps are available. The first development is slow and stop. Thus, the vibration of machines and mechanical life was extended for expenses.
    • Cause and solution to all of the machine error tells how to do.
    • The machine will not be disabled for possible errors. Working by the slowdown continues. The error is resolved automatically by the former speed is reached. Thus, the user does not prevent the flow of business.
    • Including the 65,000 color touch-panel interface (HMI) is used. Visual and user-friendly software interface.
    • PLC is used as the control unit.
    • It is very easy to use.
    • Machine interface, English, Russian, Persian and Polish language support.
    • Percent are between the Help menu.
    • Time to start cutting the Testerele between 1-10 seconds can be set.
    • Maintenance other than cleaning and lubrication is required.
    • It has advanced user guide.